cypress register: LED_SET_0_1_CTRL
Details
- Name
- LED_SET_0_1_CTRL
- Offset
- 00ec
- Feature
- LED
Description
Set the LED behaviour for LED sets 0 and 1.
Field values can be 0-31 and indicate a state matching condition. “Link” will turn the LED on when a link is detected, “Act” will briefly toggle the LED on when link activity is detected. “Link/Act” will turn the LED on when a link is detected, and briefly toggle the LED off when the link is active. Any speed specifier will narrow the match down to only those speeds.
- 0: Link/Act
- 1: Link
- 2: Act
- 3: Act Rx
- 4: Act Tx
- 6: “duplex mode”
- 7: Link 1G
- 8: Link 100M
- 9: Link 10M
- 10: Link/Act 1G
- 11: Link/Act 100M
- 12: Link/Act 10M
- 13: Link/Act 1G/100M
- 14: Link/Act 1G/10M
- 15: Link/Act 100M/10M
- 21: Link/Act 10G
- 31: Disabled
Fields
| Name | LSB | Bits | Description |
|---|---|---|---|
| RESERVED | 30 | 2 |
|
| SET1_LED2_SEL | 25 | 5 |
|
| SET1_LED1_SEL | 20 | 5 |
|
| SET1_LED0_SEL | 15 | 5 |
|
| SET0_LED2_SEL | 10 | 5 |
|
| SET0_LED1_SEL | 5 | 5 |
|
| SET0_LED0_SEL | 0 | 5 |
|