====== D-Link DGS-1210-10 (rev F1) ======

{{ https://www.dlink.com/-/media/global-product-images/business/switches/smart-managed-switches/dgs-1210-10/product-preview/dgs-1210-10_front.png?200}}

The DGS-1210-10P (rev F1) is a 8 + 2-port Gigabit L2 switch. This model is part of the [[DGS-1210 series]] line-up.

===== Hardware =====
  * [[rtl838x|RTL8380M]] SoC
  * Macronix MX25L25635F (32MB flash)
  * (128MB DDR3 RAM)
  * [[rtl8231|RTL8231]] GPIO extender to control the port LEDs, system LED, and a reset button. The button is software controlled.
  
2 Uplink ports are SFP cages which support 1000 Base-X mini GBIC modules.

Power is supplied via 100-240V AC type C13 connector.

An unpopulated Serial header is found at J6. Pins are Vcc(3.3V, Square), TX, RX and GND. Serial connection is via 115200 baud, 8N1.

==== Pin-outs ====

=== Soc UART ===
  * J6.1: VCC, 3.3V (square pad)
  * J6.2: TX
  * J6.3: RX
  * J6.4: GND

==== Board details ====

{{wiki:d-link:dgs-1210-10_rev_f1_board_top.jpeg?200}}

Does anyone have any idea what J13 might be for?  Is it possibly for an optional RJ45 console port?

===== Firmware =====

The switch ships with U-Boot  based on Realtek's SDK for RTL83xx SoCs and ucLinux 2.6.19 based on Realtek's SDK. It has a web interface for all management functions.
The board identifies as RTL8380M_INTPHY_2FIB_1G_DEMO (Port Count: 10) for the Realtek SDK. 
===== References =====
  * [[https://www.dlink.com/en/products/dgs-1210-10-10-port-gigabit-smart-managed-switch | Product page ]]

{{tag>dlink-dgs-1210}}