====== Edge-corE ECS2100-10T ======

{{wiki:edgecore:ecs-2100-10t.png?200}}

The ECS2100-10T is a 8-port Gigabit L2 switch with 2 SFP ports and a fan-less design.

===== Hardware =====
  * [[rtl838x|RTL8380M]] SoC
  * Spansion S25FS256S (32MB flash)
  * Nanya NT5CC256M8IN (256MB DDR3 SDRAM)
  * 2x [[rtl8231|RTL8231]] GPIO extender to control the port LEDs, system LED and a reset button.
  
2 Uplink ports are SFP cages which support 1000 Base-X tmini GBIC modules. 

Power is supplied via a 100-240V Type C13 connector. 

An RJ45 Serial console is found on the front panel to right of SFP ports. Serial connection is via 115200 baud, 8N1.

==== Board pictures ====

{{:wiki:edgecore:edge-core_ecs2100-10t_top.jpeg?400|}}
{{:wiki:edgecore:edge-core_ecs2100-10t_bottom.jpeg?400|}}

===== Firmware =====

It ships with U-Boot 2011.12 and Linux version 2.6.19 based on Realtek's MSDK-4.3.6 Build 104. 

It has a web interface for all management functions available from the default IP address and subnet mask for the switch is 192.168.2.10 and
255.255.255.0, with no default gateway.

====== References =====
  * Product page: [[https://www.edge-core.com/productsInfo.php?cls=&cls2=1&cls3=56&id=10]]
  
{{tag>rtl8380m}} {{tag>1000base-t}}