====== EnGenius EGS7228P ======

The EGS7228P is a 24-port Gigabit PoE+ L2 switch with 4 100Base-FX/1000Base-X SFP ports. All 24 ports are PoE+ capable w/185W budget.

===== Hardware =====
  * [[rtl838x|RTL8382M]] SoC
  * Macronix MX25L25635FMI (32MB flash)
  * (Nanya NT5CB256M8FN (256MB DDR3L SDRAM)
  * 2x [[https://www.realtek.com/en/products/communications-network-ics/item/rtl8218b-vc-cg|RTL8218B]] 10/100/1000 Octal Gigabit Ethernet Transceivers 
  * 1x [[https://www.realtek.com/en/products/communications-network-ics/item/rtl8214fc-vc-cg|RTL8214FC]] 10/100/1000 Quad Gigabit Ethernet Transceiver 
  * 2x [[rtl8231|RTL8231]] GPIO extender to control the port LEDs, system LED and a reset button.
  * STMicro ARM microcontroller to manage PoE
  * 6x Broadcom BCM59111 4-port PoE controllers
  * NSC LM63 Temperature Sensor w/Fan Control

24 Ethernet ports are PoE+ capable  
4 Uplink ports are SFP cages which support Dual-Speed modules.

Power is supplied via a 100-240V AC C13 connector

An RJ45 Console port provides serial access. Serial connection is via 115200 baud, 8N1.

===== Firmware =====

The switch ships with U-Boot 2011.12 and ucLinux 2.6.19. It has a web interface for basic management, including firmware updates. 
The board identifies as RTL8380M_INTPHY_8214FC_DEMO. 

Default username is 'admin' and password is 'password'.


===== References =====
  * [[https://www.engeniustech.com/engenius-products/24-port-gigabit-l2-switch-egs7228p/| Product support page ]]
  * [[https://wikidevi.wi-cat.ru/EnGenius_EGS7228P | WikiDevi ]]