====== EnGenius EWS5912FP ======

The EWS5912FP is a 10-port Gigabit PoE L2 switch with 2 SFP ports.  8 ports are PoE+ capable.

===== Hardware =====
  * [[rtl838x|RTL8380M]] SoC
  * Macronix MX25L25645GMI (32MB flash)
  * (Nanya NT5CC256M8JQ (256MB DDR3 SDRAM)
  * 2x [[rtl8231|RTL8231]] GPIO extender to control the port LEDs, system LED and a reset button.
  * Nuvoton ARM microcontroller to manage PoE
  * Broadcom BCM59121B0KMLG PoE controller

8 Ethernet ports are PoE+ capable  
2 Uplink ports are SFP cages which support 1000 Base-X mini GBIC modules.

Power is supplied via a 100-240V AC C13 connector

An RJ45 Console port provides serial access. Serial connection is via 115200 baud, 8N1.

===== Firmware =====

The switch ships with U-Boot 2011.12 and ucLinux 2.6.19. It has a web interface for basic management, including firmware updates. 
The board identifies as RTL8380M_INTPHY_8214FC_DEMO. 


===== References =====
  * [[https://www.engeniustech.com/engenius-products/managed-poe-network-switch-ews5912fp/| Product support page ]]