====== TP-Link T2500G-10TS ======

{{wiki:t2500g-10ts_front.jpg?200}}

The TP-Link T2500G-10TS 8 + 2-port Gigabit L2 switch with 8 gigabit ports.

===== Hardware =====
  * [[rtl838x|RTL8380M]] SoC
  * GigaDevices 25Q256DFIR (32MB flash)

2 Uplink ports are SFP cages which support 1000 Base-X tmini GBIC modules.

Power is supplied via a 230 volt mains connector, with an internal power supply for 12 Volt.

The board has 2 console connectors, either via a uart-usb controller (CY7C65211) or via a CISCO-style RS232 RJ45 plug. Connection is 38400 8N1. The USB connector takes precedence, however is not activated by U-Boot, but only during OS boot.

==== Board details ====

There is 1 main PCB and a small PCB with 3 shift register logic chips to control the LEDs.

^ Board ^ Pictures ^
| Overview | {{wiki:t2500g-10ts.jpg?200}} |
| Console area | {{wiki:t2500g-10ts_console.jpg?200}} |

===== Firmware =====

It ships with a bootloader based on Realtek's SDK for RTL83xx SoCs and Linux 3.18 based on Realtek's second generation SDK. It has a web interface for all management functions.

==== OpenWrt Support ====
There is experimental hardware support for the device in OpenWrt. SFP does not work. Console via USB does not work.

===== References =====
  * [[https://www.tp-link.com/us/business-networking/managed-switch/t2500g-10ts/ | Product page]]
{{tag>tplink-t2500g10ts}}