====== TP-LINK TL-ST1008F v2.0 ======
The TP-LINK TL-ST1008F v2.0 is a very cheap 8-port 10 gigabit switch with SFP+ ports. It is officially sold as an unmanaged switch, but the RTL9303 SoC can act as a managed switch.
{{ :screenshot_from_2023-03-01_10-43-07.png?600 |}}

===== v2.0 Hardware =====
  * [[rtl93xx|RTL9303]] SoC
  * Winbond [[https://www.winbond.com/resource-files/W25Q256JV%20SPI%20RevL%2010182022%20Plus.pdf|25Q256JVFQ]] (32MiB)
  * 512MiB DDR3 SDRAM (unknown chip)
  * 3x 74HC164 Shift registers for controlling 3 LEDs per port (24 total)
  * [[https://www.ti.com/lit/ds/symlink/tca9534a.pdf|TCA9534A]] 8-line I²C IO expander (purpose currently unknown)
  * 1 tri-state switch (used for selecting 2.5Gbps mode on stock firmware)
  * 2x [[https://www.ti.com/lit/ds/symlink/tps568230.pdf|TPS568230]] buck regulators
  * [[https://www.diodes.com/assets/Datasheets/products_inactive_data/PT7A7511-7515-7521-7525-7531-7535.pdf|PT7A7514WE]] Power supervisor / reset generator

=== Photos ===
{{ :tl-st1008f-top.jpg?direct&600 |}}
{{ :tl-st1008f-bottom.jpg?direct&600 |}}
{{::2016_0101_002939_011.jpg?direct&600|}}
{{:2016_0101_002830_008.jpg?direct&600|}}
{{:2016_0101_002710_007.jpg?direct&600|}}
{{:2016_0101_002655_006.jpg?direct&600|}}
{{:2016_0101_002640_005.jpg?direct&600|}}
{{:2016_0101_002552_003.jpg?direct&600|}}
{{:2016_0101_002442_002.jpg?direct&600|}}
{{:2016_0101_002415_001.jpg?direct&600|}}

A de-heatsinked photo of the V1 of the switch
{{ ::screenshot_from_2023-03-01_10-28-24.png?direct&600 |}}