Edge-corE ECS2100-10T
The ECS2100-10T is a 8-port Gigabit L2 switch with 2 SFP ports and a fan-less design.
Hardware
- RTL8380M SoC
- Spansion S25FS256S (32MB flash)
- Nanya NT5CC256M8IN (256MB DDR3 SDRAM)
- 2x RTL8231 GPIO extender to control the port LEDs, system LED and a reset button.
2 Uplink ports are SFP cages which support 1000 Base-X tmini GBIC modules.
Power is supplied via a 100-240V Type C13 connector.
An RJ45 Serial console is found on the front panel to right of SFP ports. Serial connection is via 115200 baud, 8N1.
Board pictures
Firmware
It ships with U-Boot 2011.12 and Linux version 2.6.19 based on Realtek's MSDK-4.3.6 Build 104.
It has a web interface for all management functions available from the default IP address and subnet mask for the switch is 192.168.2.10 and 255.255.255.0, with no default gateway.