Differences

This shows you the differences between two versions of the page.

--- cisco-sx220 [2022/04/18 18:20] – Add jtag tag svanheule
+++ cisco-sx220 [2022/08/24 23:21] (current) – Fix links raylynnknight
@@ Line 7: / Line 7: @@
 | SG220-50 |[[rtl83xx|RTL8393M]] | | |
 | SG220-50P | [[rtl83xx|RTL8393M]] | ✓ | |
-| SF220-24 | [[RTL8332M]] | | 10/100 ports only |
+| SF220-24 | [[8332m|RTL8332M]] | | 10/100 ports only |
-| SF220-24P | [[RTL8332M]] | ✓ | 10/100 ports only |
+| SF220-24P | [[8332m|RTL8332M]] | ✓ | 10/100 ports only |
-| SF220-48 | [[RTL8353M]] | | 10/100 ports only |
+| SF220-48 | [[8353m|RTL8353M]] | | 10/100 ports only |
-| SF220-48P | [[RTL8353M]] | ✓ | 10/100 ports only |
+| SF220-48P | [[8353m|RTL8353M]] | ✓ | 10/100 ports only |
 All models share the same firmware image. The image format is the same as the ''bix'' format, used by the [[gs1900 | Zyxel GS1900 series]] switches.
@@ Line 52: / Line 52: @@
       * gpio31: FAN1 (26P only)
       * gpio33: FAN2 (26P only)
+=== LED ===
+All LEDs are controlled by the port LED peripheral:
+  * Ports 1-24: Green Link/Act LED (idx 0), amber PoE LED (idx 1) (26P only)
+  * Ports 25-26: Green Link/Act LED (idx 0), green gigabit LED (idx 1)
+  * Green status LED: user controlled LED for port 27, index 1
+  * Amber status LED: user controlled LED for port 28, index 1
+The green and amber device status LEDs are wired in anti-parallel, and only one can be enabled at a time.
 === Environment ===
@@ Line 92: / Line 101: @@
   * [[https://www.cisco.com/c/en/us/products/switches/small-business-220-series-smart-plus-switches/index.html | Product page]]
   * [[https://software.cisco.com/download/home/284973399/type/284971397 | Series firmware download page]]
-  * [[https://biot.com/gpl/Publication_tarball_20160715.7z | GPL source code]]
+  * [[GPL source drops | GPL source code]]
 {{tag>jtag}}