Differences

This shows you the differences between two versions of the page.

--- dgs-1210-10 [2020/12/18 09:01] – created raylynnknight
+++ dgs-1210-10 [2021/05/05 03:41] (current) – [Pin-outs] raylynnknight
@@ Line 1: / Line 1: @@
 ====== D-Link DGS-1210-10 (rev F1) ======
+{{ https://www.dlink.com/-/media/global-product-images/business/switches/smart-managed-switches/dgs-1210-10/product-preview/dgs-1210-10_front.png?200}}
 The DGS-1210-10P (rev F1) is a 8 + 2-port Gigabit L2 switch. This model is part of the [[DGS-1210 series]] line-up.
@@ Line 13: / Line 15: @@
 Power is supplied via 100-240V AC type C13 connector.
-An unpopulated Serial header is found at J4. Pins are Vcc(3.3V, Square), TX, RX and GND. Serial connection is via 115200 baud, 8N1.
+An unpopulated Serial header is found at J6. Pins are Vcc(3.3V, Square), TX, RX and GND. Serial connection is via 115200 baud, 8N1.
 ==== Pin-outs ====
 === Soc UART ===
-  * J4.1: VCC, 3.3V (square pad)
+  * J6.1: VCC, 3.3V (square pad)
-  * J4.2: TX
+  * J6.2: TX
-  * J4.3: RX
+  * J6.3: RX
-  * J4.4: GND
+  * J6.4: GND
+==== Board details ====
+{{wiki:d-link:dgs-1210-10_rev_f1_board_top.jpeg?200}}
+Does anyone have any idea what J13 might be for?  Is it possibly for an optional RJ45 console port?
 ===== Firmware =====
 The switch ships with U-Boot  based on Realtek's SDK for RTL83xx SoCs and ucLinux 2.6.19 based on Realtek's SDK. It has a web interface for all management functions.
+The board identifies as RTL8380M_INTPHY_2FIB_1G_DEMO (Port Count: 10) for the Realtek SDK.
 ===== References =====
   * [[https://www.dlink.com/en/products/dgs-1210-10-10-port-gigabit-smart-managed-switch | Product page ]]
 {{tag>dlink-dgs-1210}}