Differences

This shows you the differences between two versions of the page.

--- dgs-1210-10 [2021/01/23 04:20] – Add image. raylynnknight
+++ dgs-1210-10 [2021/05/05 03:41] (current) – [Pin-outs] raylynnknight
@@ Line 15: / Line 15: @@
 Power is supplied via 100-240V AC type C13 connector.
-An unpopulated Serial header is found at J4. Pins are Vcc(3.3V, Square), TX, RX and GND. Serial connection is via 115200 baud, 8N1.
+An unpopulated Serial header is found at J6. Pins are Vcc(3.3V, Square), TX, RX and GND. Serial connection is via 115200 baud, 8N1.
 ==== Pin-outs ====
 === Soc UART ===
-  * J4.1: VCC, 3.3V (square pad)
+  * J6.1: VCC, 3.3V (square pad)
-  * J4.2: TX
+  * J6.2: TX
-  * J4.3: RX
+  * J6.3: RX
-  * J4.4: GND
+  * J6.4: GND
 ==== Board details ====
@@ Line 34: / Line 34: @@
 The switch ships with U-Boot  based on Realtek's SDK for RTL83xx SoCs and ucLinux 2.6.19 based on Realtek's SDK. It has a web interface for all management functions.
+The board identifies as RTL8380M_INTPHY_2FIB_1G_DEMO (Port Count: 10) for the Realtek SDK.
 ===== References =====
   * [[https://www.dlink.com/en/products/dgs-1210-10-10-port-gigabit-smart-managed-switch | Product page ]]
 {{tag>dlink-dgs-1210}}