This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" aria-hidden="true" focusable="false" width="1em" height="1em" preserveAspectRatio="xMidYMid meet" viewBox="0 0 24 24" class="iconify mr-1" data-icon="mdi:arrow-left" style="vertical-align: -0.125em; transform: rotate(360deg);"><path d="M20 11v2H8l5.5 5.5l-1.42 1.42L4.16 12l7.92-7.92L13.5 5.5L8 11h12z" fill="currentColor"></path></svg>===== D-Link DGS-1210-26 rev F1 ===== {{https://www.dlink.com/en/-/media/product-pages/dgs/1210/26/dgs121026f1front.png?200}} The switch is a 24 + 2-port Gigabit L2 switch with 24 gigabit ports. This model is part of the [[DGS-1210 series]] line-up. ==== Hardware ==== * [[rtl838x|RTL8382M]] SoC * Macronix MX25L25635F 32MB flash * Nanya NT5CC128M8GN-D1 128MB DDR3 SDRAM * 2x RTL8218B 8 Port Gigabit Phy * Realtek RTL8231 GPIO extender/LED driver 2 Uplink ports are SFP cages which support 1000 Base-X mini GBIC modules Power is supplied via a 100-240V Type C13 connector. A unpopulated serial header is found at J6. Pins are Vcc(3.3V, Square), TX, RX and GND. Serial connection is via 115200 baud, 8N1. There appears to be a unpopulated 14-pin JTAG available at J5. ==== Pin-outs ==== === Soc UART === * J6.1: VCC, 3.3V (square pad) * J6.2: TX * J6.3: RX * J6.4: GND ==== Board details ==== ===== Firmware ===== The switch ships with a bootloader based on Realtek's SDK for RTL83xx SoCs and Linux 2.6 based on Realtek's SDK. It has a web interface for all management functions. ==== OpenWrt Support ==== Support will be added soon as it should be an easy change based on other switches in the DSG-1210 series. ===== References ===== * [[https://www.dlink.com/en/products/dgs-1210-26--26-port-gigabit-smart-managed-switch | Product page ]] {{tag>jtag}}