dgs-1210-28p

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		 Previous revision
dgs-1210-28p [2021/01/16 13:38] – created raylynnknightdgs-1210-28p [2022/04/25 15:54] (current) – Tag with JTAG svanheule
Line 1: Line 1:
-===== D-Link DGS-1210-28P rev F1 =====+===== D-Link DGS-1210-28(M)P rev F1 =====
  
-The switch s a 24 + 4-port Gigabit L2 switch with 24 gigabit ports with up to 193 Watts of PoE+ power on the 24 Gigabit ports.+The switch s a 24 + 4-port Gigabit L2 switch with 24 gigabit ports with up to 193 Watts on P or 370Watts on MP of PoE+ power on the 24 Gigabit ports. 
 +The only difference between the P and MP models appears to be in the provided power supply.
  
 {{ https://www.dlink.com/-/media/global-product-images/business/switches/smart-managed-switches/dgs-1210-28p/product-preview/dgs-1210-28p_f1_front.png?200}} {{ https://www.dlink.com/-/media/global-product-images/business/switches/smart-managed-switches/dgs-1210-28p/product-preview/dgs-1210-28p_f1_front.png?200}}
Line 13: Line 14:
   * Broadcom BCM59121B0KMLG PoE controllers   * Broadcom BCM59121B0KMLG PoE controllers
  
- 4 Uplink ports are SFP cages which support 1000 Base-X mini GBIC modules shared with 4 RJ-45 ports +4 Uplink ports are SFP cages which support 1000 Base-X mini GBIC modules shared with 4 RJ-45 ports 
- + 
 +Power is supplied via a 100-240V Type C13 connector. 
 + 
 +A unpopulated serial header is found at J12. Pins are Vcc(3.3V, Square), TX, RX and GND. Serial connection is via 115200 baud, 8N1. 
 + 
 +There appears to be a unpopulated 14-pin JTAG available at J3.   
 + 
 +==== Pin-outs ==== 
 + 
 +=== Soc UART === 
 +  * J12.1: VCC, 3.3V (square pad) 
 +  * J12.2: TX 
 +  * J12.3: RX 
 +  * J12.4: GND 
 ==== Board details ==== ==== Board details ====
  
-{{wiki:d-link:dgs-1210-28p_interior.jpeg?200}} +{{wiki:d-link:dgs-1210-28p_interior.jpeg?200| DGS-1210-28P Interior}} 
-{{wiki:d-link:dgs-1210-28p_board_top.jpeg?200}} +{{wiki:d-link:dgs-1210-28mp_interior.jpeg?200| DGS-1210-28MP Interior}} 
-{{wiki:d-link:dgs-1210-28p_board_bottom.jpeg?200}} +{{wiki:d-link:dgs-1210-28p_board_top.jpeg?200| Main board top}} 
-{{wiki:d-link:dgs-1210-28p_poe_power.jpeg?200}}+{{wiki:d-link:dgs-1210-28p_board_bottom.jpeg?200| Main board bottom}} 
 +{{wiki:d-link:dgs-1210-28p_poe_power.jpeg?200| PoE board}} 
 + 
 +===== Firmware =====
  
 +The switch ships with a bootloader based on Realtek's SDK for RTL83xx SoCs and Linux 2.6 based on Realtek's SDK. It has a web interface for all management functions.
 +The board identifies as RTL8382M_8218B_INTPHY_8218B_8214FC_DEMO (Port Count: 28) for the Realtek SDK.
  
 ===== References ===== ===== References =====
   * [[https://www.dlink.com/en/products/dgs-1210-28p-28-port-gigabit-smart-managed-poe-switch | Product page ]]   * [[https://www.dlink.com/en/products/dgs-1210-28p-28-port-gigabit-smart-managed-poe-switch | Product page ]]
  
 +{{tag>jtag}}
  • dgs-1210-28p.1610804298.txt.gz
  • Last modified: 2021/01/16 13:38
  • by raylynnknight