This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" aria-hidden="true" focusable="false" width="1em" height="1em" preserveAspectRatio="xMidYMid meet" viewBox="0 0 24 24" class="iconify mr-1" data-icon="mdi:arrow-left" style="vertical-align: -0.125em; transform: rotate(360deg);"><path d="M20 11v2H8l5.5 5.5l-1.42 1.42L4.16 12l7.92-7.92L13.5 5.5L8 11h12z" fill="currentColor"></path></svg>====== Edge-corE ECS2100-10T ====== {{wiki:edgecore:ecs-2100-10t.png?200}} The ECS2100-10T is a 8-port Gigabit L2 switch with 2 SFP ports and a fan-less design. ===== Hardware ===== * [[rtl838x|RTL8380M]] SoC * Spansion S25FS256S (32MB flash) * Nanya NT5CC256M8IN (256MB DDR3 SDRAM) * 2x [[rtl8231|RTL8231]] GPIO extender to control the port LEDs, system LED and a reset button. 2 Uplink ports are SFP cages which support 1000 Base-X tmini GBIC modules. Power is supplied via a 100-240V Type C13 connector. An RJ45 Serial console is found on the front panel to right of SFP ports. Serial connection is via 115200 baud, 8N1. ==== Board pictures ==== {{:wiki:edgecore:edge-core_ecs2100-10t_top.jpeg?400|}} {{:wiki:edgecore:edge-core_ecs2100-10t_bottom.jpeg?400|}} ===== Firmware ===== It ships with U-Boot 2011.12 and Linux version 2.6.19 based on Realtek's MSDK-4.3.6 Build 104. It has a web interface for all management functions available from the default IP address and subnet mask for the switch is 192.168.2.10 and 255.255.255.0, with no default gateway. ====== References ===== * Product page: [[https://www.edge-core.com/productsInfo.php?cls=&cls2=1&cls3=56&id=10]] {{tag>rtl8380m}} {{tag>1000base-t}}