gs1900-24hp [Switches]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Zyxel GS1900-24HP ======

The GS1900-24HP is a 24 + 2-port Gigabit L2 switch with up to 170 Watts of PoE power on the 24 Gigabit ports.

===== Hardware =====
  * [[rtl838x|RTL8382M]] SoC
  * Macronix MX25L12835FM2I (16MB flash)
  * Winbond W9751G8KB (64MB DDR2 SDRAM)
  * 2 x [[RTL8231]] GPIO extenders to control the port LEDs, system LED and reset button
  * ST-Micron 32F100 ARM microcontroller for SoC-PoE management
  * 6 x Broadcom BCM59111 PoE controllers

2 Uplink ports are SFP cages which support 1000 Base-X tmini GBIC modules.

Power is supplied via a 100-240V C13 connector. 

PoE is controlled by a Broadcom BCM59111 via a ST-Micron 32F100 ARM microcontroller, which in turn talks a serial protocol with the RTL8382M (19200 baud, 8N1). The exchange between the ARM microcontroller and the RTL SoC can be snooped by connecting a logic analyzer to pins 21 (PB10) and 22 (PB11) of the STM 32F100 in its LQFP48 package.


==== Board details ====


===== Firmware =====

It ships with a bootloader based on Realtek's SDK for RTL83xx SoCs and Linux 2.6 based on Realtek's SDK. It has a web interface for all management functions.

===== References =====
  * [[https://download.zyxel.com/GS1900-24HP/datasheet/GS1900-24HP_17.pdf | Product datasheet]]
  * [[https://www.st.com/en/microcontrollers-microprocessors/stm32f100rb.html | Product page of STM 32F100 ]]

{{tag>zyxel-gs1900}}