zyxel_xgs1210_series

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
zyxel_xgs1210_series [2023/04/26 21:13] – add notion on USB oliverzyxel_xgs1210_series [2024/05/11 06:23] (current) – Show hidden blocks svanheule
Line 171: Line 171:
  
 === OEM bootlog === === OEM bootlog ===
-++++ Bootlog | 
 <code> <code>
 U-Boot 2011.12.(TRUNK_CURRENT)-svn99721 (Oct 24 2019 - 09:15:40) U-Boot 2011.12.(TRUNK_CURRENT)-svn99721 (Oct 24 2019 - 09:15:40)
Line 310: Line 309:
 RTK.0>  RTK.0> 
 </code> </code>
-++++ 
  
 ==== OEM tech-support ==== ==== OEM tech-support ====
-++++ sys dump | 
 <code> <code>
 RTK.0> sys dump hwp all RTK.0> sys dump hwp all
Line 536: Line 533:
 info->unitInfo[0].parsed_info=86c90000 info->unitInfo[0].parsed_info=86c90000
 </code> </code>
-++++ 
  
  
Line 552: Line 548:
 INT      6   IN         0        0        Permanently Pulled down, likely to indicate presence of U23 INT      6   IN         0        0        Permanently Pulled down, likely to indicate presence of U23
 INT      7   IN         1        1        Permanently Pulled up, likely to indicate presence of ...? INT      7   IN         1        1        Permanently Pulled up, likely to indicate presence of ...?
-I2C 8   OUT                          Shared SFP clock (SFP0/SFP1: SCK) +I2C 8   OUT                          Shared SFP clock (SFP0/SFP1: SCK) Pull-up near SFP0 
-I2C 9   I/O                          SDA0: (SFP0_SDA) +I2C 9   I/O                          SDA0: (SFP0_SDA) Pull-up near SFP0 
-I2C 10   I/O                          SDA1: (SFP1_SDA) +I2C 10   I/O                          SDA1: (SFP1_SDA) Pull-up near SFP1 
-INT     11   OUT        0        0        Transmit Disable (SFP0: TX_DIS_FX) +INT     11   OUT        0        0        Transmit Disable (SFP0: TX_DIS_FX) Pull-up near SFP0 
-INT     12   IN         0        0        Absent detection (SFP0: MOD-DEF0) +INT     12   IN         0        0        Absent detection (SFP0: MOD-DEF0) Pull-up near SFP0 
-INT     13   IN         0        0        Los of Signal (SFP0: LOS) +INT     13   IN         0        0        Los of Signal (SFP0: LOS) Pull-up near SFP0 (pull down NP option) 
-INT     14   IN         0        0        Transmit Fault (SFP0: TX_FAULT) +INT     14   IN         0        0        Transmit Fault (SFP0: TX_FAULT) Pull-up near SFP0 
-INT     15   OUT        0        0        Transmit Disable (SFP1: TX_DIS_FX) +INT     15   OUT        0        0        Transmit Disable (SFP1: TX_DIS_FX) Pull-up near SFP1 
-INT     16   IN         0        0        Absent detection (SFP1: MOD-DEF0) +INT     16   IN         0        0        Absent detection (SFP1: MOD-DEF0) Pull-up near SFP1 
-INT     17   IN         0        0        Los of Signal (SFP1: LOS)+INT     17   IN         0        0        Los of Signal (SFP1: LOS) Pull-up near SFP1 (pull down NP option)
 INT     18   IN         0        0        Permanently pulled down? Trace not found ... INT     18   IN         0        0        Permanently pulled down? Trace not found ...
 INT     19   IN         0        0        Permanently pulled down? Trace not found ... INT     19   IN         0        0        Permanently pulled down? Trace not found ...
 INT     20   OUT        0        0        Goes to U10? INT     20   OUT        0        0        Goes to U10?
-INT     21   IN         0        0        Transmit Fault (SFP1: TX_FAULT)+INT     21   IN         0        0        Transmit Fault (SFP1: TX_FAULT) Pull-up near SFP1
 INT     22   OUT        1        1        Reset_PHY? INT     22   OUT        1        1        Reset_PHY?
 INT     23   IN                           Reset Button INT     23   IN                           Reset Button
 </code> </code>
 +Note, that RS0/RS1 for both SFP's have permanent pull-ups, but also have the pull-down option.
 +Not connected/lost traces can still exist on an internal layer (Reset for example).
  
-= USB =+== USB ==
 While this switch has no USB ports, the USB pins appear to be on TP2 and TP3 on the bottom (to be confirmed) While this switch has no USB ports, the USB pins appear to be on TP2 and TP3 on the bottom (to be confirmed)
  
Line 631: Line 629:
  
 ===== OpenWRT Bootlog ==== ===== OpenWRT Bootlog ====
-++++ Full OpenWRT Bootlog | 
 <code> <code>
 Board: RTL9300 CPU:800MHz LX:175MHz DDR:600MHz Board: RTL9300 CPU:800MHz LX:175MHz DDR:600MHz
Line 766: Line 763:
 [    0.020076] printk: bootconsole [early0] disabled [    0.020076] printk: bootconsole [early0] disabled
 </code> </code>
-++++ 
  
 ==== OpenWrt Support ==== ==== OpenWrt Support ====
  • zyxel_xgs1210_series.1682543612.txt.gz
  • Last modified: 2023/04/26 21:13
  • by oliver