Differences

This shows you the differences between two versions of the page.

--- zyxel_xgs1930_series [2020/10/26 11:59] – created bkoblitz
+++ zyxel_xgs1930_series [2022/07/18 10:48] (current) – added missing info for xgs1930-52hp firebat
@@ Line 1: / Line 1: @@
-====== Zyxel XS1930 series ======
+====== ZyXEL XGS1930 series ======
-The GS1920 series is a line of managed multi-gigabit Ethernet switches.
+The XGS1930 series is a line of stackable managed gigabit Ethernet switches, with four SFP+ uplinks.
-^ Switch name ^ RJ45 ports ^ Combo SFP ports ^ Dedicated SFP ports ^ PoE ports ^
+These switches are designed around a RTL9301 SoC. The 28(HP) versions have one of these, while the 52(HP) very likely have two internally stacked RTL9301 chips.
-| GS1930-10 | 8 | 2 | - | - |
+^ Switch name ^ gigabit RJ45 ports ^ SFP+ ports ^ PoE ports ^
+| XGS1930-28 | 24 | 4 | - |
+| XGS1930-28HP | 24 | 4 | 24 |
+| XGS1930-52 | 48 | 4 | - |
+| XGS1930-52HP | 48 | 4 | 48 |
 ===== Models =====
-==== GS1930-10HP ====
+==== XGS1930-28 ====
 === Hardware ===
-  * SoC: RTL9313
+  * SoC: RTL9301
-  * Ethernet:
+  * Ethernet: 4× RTL8218D
-  * RAM: Winbond W632GU6MB 256MiB DDR3
+  * RAM: Nanya NT5CC256M16ER-EK 512MiB DDR3L-1866
-  * Flash: Macronix MX25L25645G, 32MiB SPI NOR
+  * Flash: Macronix MX25L25635FMI-10G, 32MiB SPI NOR
-  * GPIO: 1× RTL8231
+  * GPIO and LEDs: 3× [[RTL8231]]
-    * HC164 shift register for device status LEDs
-  * 3-pin fan
 The serial port is accessible via pins from from the outside on the right side of the device. Pins are front to back: GND, TX, RX, Vcc.
-Port settings are 115200 baud, 8n1, with 3.3 logic level.
-=== Photos ===
+==== XGS1930-52HP ====
-^ Board ^ Pictures ^
+=== Hardware ===
-| Overview | {{:wiki:zyxel:gs1920-24hp-front.jpg?200|device front}} {{:wiki:xs1930-10-overview.jpg?200|inside overview}} |
+  * SoC: 2x RTL9301
-| Main board | {{:wiki:xs1930-10_pcb.jpg?200|main board overview}} {{:wiki:xs1930-10_back.jpg|main board back side}}
+  * Ethernet: 6× RTL8218D
+  * SFP+: 2x RTL8295R
+  * RAM: Nanya NT5CC256M16ER-EK 512MiB DDR3L-1866
+  * Flash: Macronix MX25L25635FMI-10G, 32MiB SPI NOR
+  * GPIO and LEDs: 7× [[RTL8231]]
+The serial port is accessible via pins from from the outside on the right side of the device. Pins are front to back: GND, TX, RX, Vcc.
+{{tag>zyxel}} {{tag>sfp_10g}} {{tag>jtag}}