Differences

This shows you the differences between two versions of the page.

--- zyxel_xgs1930_series [2020/10/26 12:43] – removed svanheule
+++ zyxel_xgs1930_series [2022/07/18 10:48] (current) – added missing info for xgs1930-52hp firebat
@@ Line 1: / Line 1: @@
+====== ZyXEL XGS1930 series ======
+The XGS1930 series is a line of stackable managed gigabit Ethernet switches, with four SFP+ uplinks.
+These switches are designed around a RTL9301 SoC. The 28(HP) versions have one of these, while the 52(HP) very likely have two internally stacked RTL9301 chips.
+^ Switch name ^ gigabit RJ45 ports ^ SFP+ ports ^ PoE ports ^
+| XGS1930-28 | 24 | 4 | - |
+| XGS1930-28HP | 24 | 4 | 24 |
+| XGS1930-52 | 48 | 4 | - |
+| XGS1930-52HP | 48 | 4 | 48 |
+===== Models =====
+==== XGS1930-28 ====
+=== Hardware ===
+  * SoC: RTL9301
+  * Ethernet: 4× RTL8218D
+  * RAM: Nanya NT5CC256M16ER-EK 512MiB DDR3L-1866
+  * Flash: Macronix MX25L25635FMI-10G, 32MiB SPI NOR
+  * GPIO and LEDs: 3× [[RTL8231]]
+The serial port is accessible via pins from from the outside on the right side of the device. Pins are front to back: GND, TX, RX, Vcc.
+==== XGS1930-52HP ====
+=== Hardware ===
+  * SoC: 2x RTL9301
+  * Ethernet: 6× RTL8218D
+  * SFP+: 2x RTL8295R
+  * RAM: Nanya NT5CC256M16ER-EK 512MiB DDR3L-1866
+  * Flash: Macronix MX25L25635FMI-10G, 32MiB SPI NOR
+  * GPIO and LEDs: 7× [[RTL8231]]
+The serial port is accessible via pins from from the outside on the right side of the device. Pins are front to back: GND, TX, RX, Vcc.
+{{tag>zyxel}} {{tag>sfp_10g}} {{tag>jtag}}