zyxel_xgs1930_series

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
zyxel_xgs1930_series [2022/06/28 20:03] – Page title capitalisation svanheulezyxel_xgs1930_series [2022/07/18 10:48] (current) – added missing info for xgs1930-52hp firebat
Line 2: Line 2:
  
 The XGS1930 series is a line of stackable managed gigabit Ethernet switches, with four SFP+ uplinks. The XGS1930 series is a line of stackable managed gigabit Ethernet switches, with four SFP+ uplinks.
 +
 +These switches are designed around a RTL9301 SoC. The 28(HP) versions have one of these, while the 52(HP) very likely have two internally stacked RTL9301 chips.
  
 ^ Switch name ^ gigabit RJ45 ports ^ SFP+ ports ^ PoE ports ^ ^ Switch name ^ gigabit RJ45 ports ^ SFP+ ports ^ PoE ports ^
-| XS1930-28 | 24 | 4 | - | +| XGS1930-28 | 24 | 4 | - | 
-| XS1930-28HP | 24 | 4 | 24 | +| XGS1930-28HP | 24 | 4 | 24 | 
-| XS1930-52 | 48 | 4 | - |+| XGS1930-52 | 48 | 4 | - | 
 +| XGS1930-52HP | 48 | 4 | 48 |
  
 ===== Models ===== ===== Models =====
Line 18: Line 21:
  
 The serial port is accessible via pins from from the outside on the right side of the device. Pins are front to back: GND, TX, RX, Vcc. The serial port is accessible via pins from from the outside on the right side of the device. Pins are front to back: GND, TX, RX, Vcc.
 +
 +==== XGS1930-52HP ====
 +=== Hardware ===
 +  * SoC: 2x RTL9301
 +  * Ethernet: 6× RTL8218D
 +  * SFP+: 2x RTL8295R
 +  * RAM: Nanya NT5CC256M16ER-EK 512MiB DDR3L-1866
 +  * Flash: Macronix MX25L25635FMI-10G, 32MiB SPI NOR
 +  * GPIO and LEDs: 7× [[RTL8231]]
 +
 +The serial port is accessible via pins from from the outside on the right side of the device. Pins are front to back: GND, TX, RX, Vcc.
 +
 +{{tag>zyxel}} {{tag>sfp_10g}} {{tag>jtag}}
  • zyxel_xgs1930_series.1656446591.txt.gz
  • Last modified: 2022/06/28 20:03
  • by svanheule