mango register: MAC_L2_GLOBAL_CTRL2
Details
- Name
- MAC_L2_GLOBAL_CTRL2
- Offset
- 1358
- Feature
- MAC_CONTROL
Fields
| Name | LSB | Bits | Description |
|---|---|---|---|
| RESERVED | 31 | 1 |
|
| STRAP_DUMMY_3 | 30 | 1 |
|
| STRAP_DUMMY_2 | 29 | 1 |
|
| STRAP_DUMMY_1 | 28 | 1 |
|
| STRAP_DUMMY_0 | 27 | 1 |
|
| IFU_PATCH_EN | 26 | 1 |
|
| HW_RESET_EN | 25 | 1 |
|
| DDR_DATA_BUS_WIDTH_SEL | 24 | 1 |
|
| BYPASS_OC0_PLL | 23 | 1 |
|
| BYPASS_INITIAL | 22 | 1 |
|
| RST_CMD_DIS | 21 | 1 |
|
| RESERVED | 20 | 1 |
|
| EFUSE_STANDBY_EN | 19 | 1 |
|
| OUTPUT_125M_SEL | 18 | 1 |
|
| SMI_SET3_SEL | 17 | 1 |
|
| LED_SYNC_SEL | 16 | 1 |
|
| JTAG_SEL | 15 | 1 |
Set to enable the E-JTAG port. Clear to use the pins as GPIO. |
| SYS_CLK_SEL | 13 | 2 |
|
| SET3_MDC_EN | 12 | 1 |
|
| SET2_MDC_EN | 11 | 1 |
|
| SET1_MDC_EN | 10 | 1 |
|
| SET0_MDC_EN | 9 | 1 |
|
| SYS_LED_EN | 8 | 1 |
Set to enable the system LED peripheral and mux the output pin. Clear to mux the pin as GPIO0. |
| RESERVED | 7 | 1 |
|
| BOOT_SEL | 6 | 1 |
|
| DDR_TYPE_SEL | 4 | 2 |
|
| POR_SEL | 3 | 1 |
|
| EXT_CPU_EN | 2 | 1 |
|
| REG_IF_SEL | 1 | 1 |
|
| EFUSE_EN | 0 | 1 |
|