This is an old revision of the document!
ALLNET ALL-SG8208M
The SG8208M is a 8-port Gigabit L2 switch, marketed as "smart-managed". It has an RTL8380M SoC with 8 built-in PHYs, and two RTL8231 GPIO extenders to control the port LEDs, system LED and reset button. Power is supplied via a standard 12V 1A barrel connector. At the back is a hard power-on/off switch and at the right side behind the grid a hard reset button. A Serial header is already populated with pins and marked with GND TX RX Vcc(3.3V). Serial connection is via 115200 baud, 8N1.
It ships with a bootloader based on Realtek's SDK for RTL83xx SoCs and Linux 2.6 based on Realtek's SDK. It has a web interface for all management functions.
OpenWRT Support
There is support for complete hardware support in an experimental OpenWRT branch. Of the L2 features, port isolation, 4096 VLANs, Local Port Mirroring, EEE are supported. Original features such as cable integrity tests, offloaded remote mirroring and Port-ACLs are not yet supported.
PCB
