Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
all8208m [2020/09/13 19:09] biotall8208m [2021/02/03 16:49] (current) – Correct the spelling of the OpenWrt project name pepe2k
Line 1: Line 1:
-=== ALLNET ALL-SG8208M ===+====== ALLNET ALL-SG8208M ======
  
 {{ wiki:all-sg8208m-front.png?200}} {{ wiki:all-sg8208m-front.png?200}}
  
-The SG8208M is 8-port Gigabit L2 switch, marketed as "smart-managed"It has an [[RTL8380M]] SoC with 8 built-in PHYs, and two [[RTL8231]] GPIO extenders to control the port LEDs, system LED and reset button.+The SG8208M is an 8-port Gigabit L2 switch, marketed as "smart-managed". 
 + 
 +===== Hardware ===== 
 +  * [[rtl838x|RTL8380M]] SoC 
 +  * 2 * [[RTL8231]] GPIO extenders to control the port LEDs, system LED and reset button. 
 +  * Macronix MX25L12805D (16MB flash) 
 +  * Nanya NT5TU128MBHE (128MB RAM)  
 Power is supplied via a standard 12V 1A barrel connector. At the back is a hard power-on/off switch and at the right side behind the grid a hard reset button. Power is supplied via a standard 12V 1A barrel connector. At the back is a hard power-on/off switch and at the right side behind the grid a hard reset button.
-A Serial header is already populated with pins and marked with GND TX RX Vcc(3.3V). Serial connection is via 115200 baud, 8N1.+A Serial header is already populated with pins and marked with ''GND TX RX Vcc''(3.3V). Serial connection is via 115200 baud, 8N1. Connect TX to TX and RX to RX.
  
 +==== Board details ====
 +{{wiki:dsc01052_s.jpg?200}}
 +
 +===== Firmware =====
 It ships with a bootloader based on Realtek's SDK for RTL83xx SoCs and Linux 2.6 based on Realtek's SDK. It has a web interface for all management functions. It ships with a bootloader based on Realtek's SDK for RTL83xx SoCs and Linux 2.6 based on Realtek's SDK. It has a web interface for all management functions.
  
-=== OpenWRT Support === +==== OpenWrt Support ==== 
-There is complete hardware support in an experimental OpenWRT branch. Of the L2 features, port isolation, 4096 VLANs, Local Port Mirroring, EEE are supported.+There is complete hardware support in an experimental OpenWrt branch. Of the L2 features, port isolation, 4096 VLANs, Local Port Mirroring, EEE are supported.
 Original features such as cable integrity tests, offloaded remote mirroring and Port-ACLs are not yet supported. Original features such as cable integrity tests, offloaded remote mirroring and Port-ACLs are not yet supported.
  
-=== PCB === 
- 
-{{wiki:dsc01052_s.jpg?200}} 
  
-=== Links ===+===== References =====
   * [[https://www.allnet.de/en/allnet-brand/produkte/switches/entry-line-layer2-smart-managed-unamanged/switches-desktop-gigabit/p/allnet-all-sg8208m-8-port-gigabit-switch-smart-managed-fanless-snmp/ | Product page]]   * [[https://www.allnet.de/en/allnet-brand/produkte/switches/entry-line-layer2-smart-managed-unamanged/switches-desktop-gigabit/p/allnet-all-sg8208m-8-port-gigabit-switch-smart-managed-fanless-snmp/ | Product page]]
   * Allnet [[https://www.allnet.de/nc/en/allnet-brand/support/treiber-firmware/download/112533/ | download page]] for SG8208M   * Allnet [[https://www.allnet.de/nc/en/allnet-brand/support/treiber-firmware/download/112533/ | download page]] for SG8208M
  
  • all8208m.1600024199.txt.gz
  • Last modified: 2020/09/13 19:09
  • by biot