EnGenius EGS7228P
The EGS7228P is a 24-port Gigabit PoE+ L2 switch with 4 100Base-FX/1000Base-X SFP ports. All 24 ports are PoE+ capable w/185W budget.
Hardware
- RTL8382M SoC
- Macronix MX25L25635FMI (32MB flash)
- (Nanya NT5CB256M8FN (256MB DDR3L SDRAM)
- 2x RTL8218B 10/100/1000 Octal Gigabit Ethernet Transceivers
- 1x RTL8214FC 10/100/1000 Quad Gigabit Ethernet Transceiver
- 2x RTL8231 GPIO extender to control the port LEDs, system LED and a reset button.
- STMicro ARM microcontroller to manage PoE
- 6x Broadcom BCM59111 4-port PoE controllers
- NSC LM63 Temperature Sensor w/Fan Control
24 Ethernet ports are PoE+ capable 4 Uplink ports are SFP cages which support Dual-Speed modules.
Power is supplied via a 100-240V AC C13 connector
An RJ45 Console port provides serial access. Serial connection is via 115200 baud, 8N1.
Firmware
The switch ships with U-Boot 2011.12 and ucLinux 2.6.19. It has a web interface for basic management, including firmware updates. The board identifies as RTL8380M_INTPHY_8214FC_DEMO.
Default username is 'admin' and password is 'password'.