Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision | ||
| ews52912fp [2021/06/06 06:03] – created raylynnknight | ews52912fp [2025/04/03 06:25] (current) – removed raylynnknight | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | ====== EnGenius EWS2910P ====== | ||
| - | |||
| - | The EWS5912FP is a 10-port Gigabit PoE L2 switch with 2 SFP ports. | ||
| - | |||
| - | ===== Hardware ===== | ||
| - | * [[rtl838x|RTL8380M]] SoC | ||
| - | * Macronix MX25L25645GMI (32MB flash) | ||
| - | * (Nanya NT5CC256M8JQ (256MB DDR3 SDRAM) | ||
| - | * 2x [[rtl8231|RTL8231]] GPIO extender to control the port LEDs, system LED and a reset button. | ||
| - | * Nuvoton ARM microcontroller to manage PoE | ||
| - | * Broadcom BCM59121B0KMLG PoE controller | ||
| - | |||
| - | 8 Ethernet ports are PoE+ capable | ||
| - | 2 Uplink ports are SFP cages which support 1000 Base-X mini GBIC modules. | ||
| - | |||
| - | Power is supplied via a 100-240V AC C13 connector | ||
| - | |||
| - | An RJ45 Console port provides serial access. Serial connection is via 115200 baud, 8N1. | ||
| - | |||
| - | ===== Firmware ===== | ||
| - | |||
| - | The switch ships with U-Boot 2011.12 and ucLinux 2.6.19. It has a web interface for basic management, including firmware updates. | ||
| - | The board identifies as RTL8380M_INTPHY_8214FC_DEMO. | ||
| - | |||
| - | |||
| - | ===== References ===== | ||
| - | * [[https:// | ||
| - | |||