Differences

This shows you the differences between two versions of the page.

--- gpio_control [2023/02/28 09:24] – oliver
+++ gpio_control [2025/01/15 10:56] (current) – Update RTL8390 pin muxing table svanheule
@@ Line 51: / Line 51: @@
 ^ Peripheral ^ Package pin ^ GPIO index ^ Alternative function ^ Pin configuration ^
 | System LED |  | 0 | sys-led | Use the SYS_LED_EN bit in LED_GLB_CTRL to mux sys-led peripheral |
-| GPIO1 |  | 1 | N/A | No known alternative functions |
+| RTL8231 MIIM bus |  | 1 | MDC  |  |
-| RTL8231 MIIM bus |  | 2 | MDC  |  |
+| :::              |  | 2 | MDIO | ::: |
-| :::              |  | 3 | MDIO | ::: |
+| JTAG |  | 3 | TMS   | Set JTAG_SEL to 0 (default) for JTAG, 2 for GPIO |
-| UART1 |  | 6 | RX | Set JTAG_SEL to 1 for UART1, 2 for GPIO |
-| :::   |  | 7 | TX | ::: |
-| JTAG |  |  | TMS   | Set JTAG_SEL to 0 (default) for JTAG, 2 for GPIO |
 | :::  |  | 4 | TCK   | ::: |
-| :::  |  |  | /TRST | ::: |
+| :::  |  | 5 | /TRST | ::: |
-| :::  |  | 7 | TDO   | ::: |
 | :::  |  | 6 | TDI   | ::: |
+| :::  |  | 7 | TDO   | ::: |
+| UART1 |  | 3 | /RTS | Set JTAG_SEL to 1 for UART1, 2 for GPIO |
+| :::   |  | 4 | /CTS | ::: |
+| :::   |  | 6 | RXD   | ::: |
+| :::   |  | 7 | TXD   | ::: |
+| SPI CS |  | 8 | /CS2 | Set SPI_CS_IF_SEL to 1 for extra chip selects, 0 for GPIO |
+| :::    |  | 9 | /CS3 | ::: |
+| IEEE 1588 |  | 12 |  | OUTPUT_1588_SEL |