Differences

This shows you the differences between two versions of the page.

--- teg-082ws [2020/10/01 19:54] – biot
+++ teg-082ws [2021/05/05 03:51] (current) – [Trendnet TEG-082WS V2.1R] raylynnknight
@@ Line 1: / Line 1: @@
 ===== Trendnet TEG-082WS V2.1R =====
+{{  https://www.trendnet.com/images/products/photos/TEG-082WS_v2/TEG-082WS_v2_d01_2-(mirror).png?200}}
 The switch has 8 RJ45 ports and 2 SFP ports, all gigabit capable.
@@ Line 7: / Line 9: @@
   * Macronix MX25L25635F 32MB flash
   * Nanya NT5CC256M8IN-D1 256MB DDR3 SDRAM
-  * Realtek RTL8231 GPIO extender/LED driver
+  * Realtek [[rtl8231|RTL8231]] GPIO extender/LED driver
+Uplink ports are SFP cages which support 1000 Base-X mini GBIC modules.
+Power is supplied via 100-240V AC type C13 connector.
+An unpopulated Serial header is found at J6. Pins are Vcc(3.3V, Square), TX, RX and GND. Serial connection is via 115200 baud, 8N1.
 ==== Board pictures ====
@@ Line 14: / Line 22: @@
 ==== Pinouts ====
 === UART ===
-Unlike most boards, UART0 (the console) isn't broken out to a header footprint. The RX/TX pins are on pins 125/124 of the RTL8380, respectively. They go to partially populated footprints at R86 (RX) and R86 (TX), where they can be tapped into.
+The UART is broken out to unpopulated header J6:
+  * J6.1 (left): possibly 3.3V
+  * J6.2: TX
+  * J6.3: RX
+  * J6.4: GND