TP-Link TL-SG3210 V2
The TL-SG3210 V2 is a 8 + 2-port Gigabit L2 switch.
Hardware
- RTL8380M SoC
- Winbond W25Q256JVFQ (16MB flash)
- Winbond W631GG8MB (32MB DDR SDRAM)
Power is supplied via a 100-240V C13 connector.
An RJ-45 Console is available on the front panel. Serial connection is via 38400 baud, 8N1.
Bootloader
Uses a cut down boot loader that identifies itself as TP-LINK BOOTUTIL(v1.0.0). Offers the following functions:
- help
- reboot
- ifconfig - configure the interface
- ftp - configure the remote host (ip, username, password, image name)
- upgrade
- start
- reset