Differences

This shows you the differences between two versions of the page.

--- tl-st1008f [2022/11/18 16:11] – lorenz
+++ tl-st1008f [2023/03/01 12:29] (current) – oliver
@@ Line 1: / Line 1: @@
+====== TP-LINK TL-ST1008F v2.0 ======
+The TP-LINK TL-ST1008F v2.0 is a very cheap 8-port 10 gigabit switch with SFP+ ports. It is officially sold as an unmanaged switch, but the RTL9303 SoC can act as a managed switch.
+{{ :screenshot_from_2023-03-01_10-43-07.png?600 |}}
+===== v2.0 Hardware =====
+  * [[rtl93xx|RTL9303]] SoC
+  * Winbond [[https://www.winbond.com/resource-files/W25Q256JV%20SPI%20RevL%2010182022%20Plus.pdf|25Q256JVFQ]] (32MiB)
+  * 512MiB DDR3 SDRAM (unknown chip)
+  * 3x 74HC164 Shift registers for controlling 3 LEDs per port (24 total)
+  * [[https://www.ti.com/lit/ds/symlink/tca9534a.pdf|TCA9534A]] 8-line I²C IO expander (purpose currently unknown)
+  * 1 tri-state switch (used for selecting 2.5Gbps mode on stock firmware)
+  * 2x [[https://www.ti.com/lit/ds/symlink/tps568230.pdf|TPS568230]] buck regulators
+  * [[https://www.diodes.com/assets/Datasheets/products_inactive_data/PT7A7511-7515-7521-7525-7531-7535.pdf|PT7A7514WE]] Power supervisor / reset generator
+=== Photos ===
 {{ :tl-st1008f-top.jpg?direct&600 |}}
 {{ :tl-st1008f-bottom.jpg?direct&600 |}}
@@ Line 10: / Line 25: @@
 {{:2016_0101_002415_001.jpg?direct&600|}}
+A de-heatsinked photo of the V1 of the switch
+{{ ::screenshot_from_2023-03-01_10-28-24.png?direct&600 |}}