Zyxel XMG1915-10EP
The XMG1915-10EP is a 8-Port 2.5GbE Smart Managed Switch with 2 SFP+ Uplink and up to 130 Watts of PoE power on the 8 2.5GbE ports
Hardware
- RTL9302C Soc
- Nuvoton NUC029ZAN ARM microcontroller
- 2x RTL8224 PHY
- 1x RTL8231 GPIO extender
- Winbond W632GU6NB-11 (256MB DDR3 SDRAM)
- Macronix MX25L25645GM2I-08G (32MB SPI NOR flash)
Power is supplied via a 54 VDC, 2.77 A barrel connector
PoE is controlled by 2 Realtek RTL8239 4-port 802.3bt-Compliant PSE controllers via the Nuvoton NUC029ZAN ARM microcontroller.
Pinouts
Header J5 has a UART
- J5.1:
- J5.2:
- J5.3:
- J5.4:
Pin 1 is identified closest to the JP5 marking.
Header J2 is MIPS EJTAG:
- J2.1: TRST
- J2.2: GND
- J2.3: TDI
- J2.4: GND
- J2.5: TDO
- J2.6: GND
- J2.7: TMS
- J2.8: GND
- J2.9: TCK
- J2.10: GND
- J2.11: RST
- J2.12: RTCK
- J2.13: DINT
- J2.14: VIO
Pin 1 is identified with a white dot on opposite end to the J2 marking.
Board details
Firmware
Device uses the ZyXel Bootbase V1.00 bootloader and ZyNOS Version: V4.80(ACGO.3)